X32 Waves 24+2+L/R Scene File
***The X/M32 needs to be running on firmware version 4.00 or higher to utilize the User Routing Blocks.***
These are .scn files setup that are initialized with only the routing set. The routing is set for an X32 with routing to and from the expansion card for the following setup:
32 channels with channels 1-24 routed to Waves as inserts, channel 25-32 routed without Waves inserts but still usable from inputs 25-32 on the mixer preamps or stage rack, two sets of stereo effects sends and returns to Waves, and the Main Left Right bus getting an insert from Waves as well.
There is a .scn file for use with a 32 channel stage rack overs AES50(A) and a .scn file without a stage rack using the mixer’s local preamps instead.
You can open these scenes and make your own new scene file on top of them or save a routing preset to the mixers library and recall the routing to scenes you already have.
The routing goes out to your expansion card 1 to 1 for the channels from 1-24. The Stereo Effects Sends and Returns use card in/out 25/26 and 27/28 and card in/out 29/30 are the Main Bus insert. In Waves you would want to set the rack for the Effects Send/Returns and Main Left/Right Bus as stereo racks. The channels could be mono or stereo depending on your setup.
There is also a Waves SuperRack file that is just the empty racks but is setup to correspond with the above X32 Scene.
You can open these scenes and make your own new scene file or save a routing preset to the mixers library and recall the routing to scenes you already have.